Koso RX2N GP - 5-2 Target Distance Timer Test

5 -1 ~: Target speed timer test
'~~t5km/h ~km/h &Peed UQlP10 km/h
The timer is automatic , so when ~ ~ ~
your bike start to move the 0 0 1\ 0 1\ 0 1\
timer will start to count the time
and stop automatically after you IiID lIm IiID
stops the . SETSETS8 888ffB8 8838B8
.& Duong the test- the _will keep flashing!
When
you reach the target speed you set {O-
110 km/hJ the timer wi/r stop counting (19"20
second).
r'Il If you Just want to use the function one time, hOld down
LV 1!;5c~~'5'fl~:4b?/? ;g:e~~econds to save the records ond
If you want to test it again , press the Adjust
button
to clear the record and enter the target
speed timer test screen again.
W' failure
-~~t5km/h ~km/h &peedUP(5e~f
If you don't reach the target
speed or stop accelerating 0 0 ~ 0 ~ 0
during the test, you could press
the Adjust button to stop the IiID IiID IiID
timer. Then you could press the 888ET88 8/J8 B B8 8ET8Ef88
Adjust button one time to clear
the record and enter the target speed timer test screen.
5-2 ?~: Target distance timer test
.. , ~ rt!Y.UII~ceJJ
Please use this function at racetrack to avoid
traffic accidents.
In power test screen, press the Select button 2
times to enter the target distance timer test
screen.
~ "'P"'/e:-:a""s-=-e -= th:-:e'-:t'-::e -::C
s
t
o
-'--'--s. s"'ta:C:r'"t"" st"'w"'hre-=-n=-r;thCe~b"ik-:e-C
7
::C
p
.& If you have the power test record, it will
display the record first. You must clear the
record before starting a new test,
Press the Adjust button to clear the record and
enter the target distance timer test screen.
EX. Now you could see the record you have
before, It displays the target speed timer setting
as
2/32 mile {100 MJ the test result: 10"27
seconds, The top speed is 63 km/h during the
test., The MAX RPM is 8,000 RPM during the test.
r'Il If you just want to check the record, you could hold down
LV the Select button for 3 seconds to bock to the main screen
When the bike moves , the timer will start
automatically
.& Now the _ IS flashing!
~ About the power test setting, please
check 4-10.