Koso RX2N GP - 5-3 Top Speed Test

5-2 1'~ : Target distance timer test
- '~~~088Bl3El®OEl88Ba~Peed upm0f1"BB El
The timer is automatic, so when ~ ~ ~
your bike start to move the
timer will start to count the time 0 0 0 0
and stop automatically after you
stops
the . 0 M' '100 m
& OUTIng the test, the rawil' keep nashmg!
When you
reach the target distance you set
(100 M .2/32 mile), the timer will stop counting
(10"27 second).
llJ
It you juSI wont to use the function one lime , hold down
~ • tHe Setect button tor 3 seconds to save the records ond
. bOC k to th e main screen.
If you want to test it again, press the Adjust
button to clear the record and enter the target
speed timer test screen again .
, ~~ ~ ~ ~
If you don't Ifni,h the tatget (5'8®~'~®~d U,®B8
distance test or stop
accelerating during the test, 0 0 0 0
you could press the Adjust TI t
button to stop the timer . 0 M' fai/~~
Then you could press the Adjust button one t ime to clear the record and
enter the target distance timer test screen.
I
5-3 1'~: The to p speed test
&.1W !y.I.'"t'reJJ
Please use this function at racetrack to avoid
traffic accidents.
In power test screen, press the Select button 3
times to
enter the top speed test screen.
~ Please start the test when the bike stops.
& If you have the power test record, it will
display the
record first. You must clear the
record before starting a new test.
Press the Adjust button to clear the record and
enter the top speed test screen.
EX. Now you could see the record you have
before. It displays the top speed is 180 km /h, thc
distance to reach the top speed is 510 M The
MAX RPM is 10,000 RPM during the test, the timc
you need to reach the top speed is 10"20
seconds.
r'jfJ It you just wont to check the record . you could hOld down
I~ the Setect button tor 3 seconds to bock to the main screer
When the bike moves, the timer will start
automatically.
& Now the _ is flashing!
~ The top speed test range.'
Speed:
0-360 km/h Distance: 0-999
M (3280 feet) RPM. 0-10,000/20,000
RPM. Timer: 0-9'59" 99 seconds.
& The settinr;;;, unit will change together with thE
speed unit setting (4-1).