Koso RX2N GP - 3-7 Setting Screen Navigation; 3-8 Power Test Screen Usage

3 -7 The setting screen instruction
In seffing screen pr ess the Select button to choose the luncllon
you want 10 sel. Th e lunc ti on in seNing screen Is In orde r as speed
unit , cycle and piston, temperature unit, speeding warning light,
the
RPM shlflllght, over heat warning light, tire circumference
and sensor pOint, time, fuel gauge and Insufficient warning,
target speed timer test settfng . target distance timer settfng
and you could lin is h the s etting as the order. After finishing the
press down Ihe Select button to leave the setting screen.
+17
+16
+1
+2
+15
+3
+14
+4
+13
+12
+5
+11
+6
+10
+9
+8
+7
~ I you enter the setting screen for 0 seconds and don't press the
button , it will bock to the main screen automatically.
3 -8 The power test screen instruction
In power test screen, press the Select button to
choose the test you want to do. The test function
is in order as target speed timer, target distance
timer, top speed timer.
In power test scr een , press the Select button to
switch from the target speed timer to target
distance timer.
EX. Now it is in the target speed timer screen,
and the setting Is 0-110 km/h.
In power test screen, press the Select button
to switch from the target distance timer to thE
top speed timer screen.
E X. Now the screen sw itch from the target
speed timer screen to the target distance
timer screen, and the setting is 0-100 M
(2 /32 mile).
In power test screen, press the Select button to
switch from the top speed timer to the target
speed timer.
EX. Now the screen switch from the target
distance timer screen to the top speed timer
screen, and the setting is 0-100 M (2/32 mile).