Koso RX2N GP - Performance Testing; 5-1 Target Speed Timer Test

I
4 -1 0 The target speed timer 1 target distance timer setting 1'cW~
TEST
Press the Select button to continue the function
setting.
EX. Now the target distance timer setting is
changed from 1132 mile (50 M) to 2132 mile
(100 M).
~ ;-;-~-;;:h:-:e:-:n~y-=-o~u:-:/~e-=-av:-:e~th;:-i;:-s -'-sc;:-r-=-e-e-n-, 7.th-e-se"""tt"" in - g ----,
is finished.
If you just wont to make this function sel1ina. YOU cou ld
'I[ . hOld down the Select button for 3 secondS to bock to
(l)
the main screen.
5 -1 1'~: Target speed timer test
""~~'ili"LIt!Cffi
Please use this function at racetrack to avoid
traffic accidents.
In power test screen, press the Select button on!
time to enter the target speed timer test screen.
~ Please start the test when the bike stops.
,#~-- ........ .
,
: I '
•
1 'I'
\~ ~ ~'''~
" .......
[~
it. If you have the power test record, it will
display the
record first. You must clear the
record before starting a new test.
Press the Adjust button to clear the record and
enter the target speed timer test screen.
E
X. Now you could see-the record you have
before. It displays the target speed timer setting
as 0- 110 km / h, the test result: 19"20 seconds.
The top speed is 110 kmlh during the test" The
MAX RPM is 10,000 RPM during the test.
(ji] If YOU just wont to Check tile record. you cou ld hOld down
U the Select button for 3 seconds to bock to the main screen.
When the bike moves, the timer will start
automatically.
it. Now the _ Is flashing!
~ About the power test setting, please
check 4-10 .