Off
ProgPessive Scan
By displaying all the lines of a picture simultaneous [instead of displaying odd
and even lines alternatively such as a conventional TV}, Progressive Scan
greatly enhances picture resolution while minimizing distortion and flickering.
To use this feature, Veur TV must be PPegressive Scan cempatibme
with Component Video input jacks connected to the DVD unit°
1. Set your unit to NTSC output mode.
2. Select the Progressive Scan option and press OK lop kZSelect on the
remote control] to activate.
3. A cautien message will display. PressOKtecentinue.
Cau_iont if you see d,'s_orCedor no picture afber pressed O,q',C,eencheck che
fo//ow,'nd:
B Your TV may noC be Prodressive Scan oo,,npaC/ble. Wa/C a few seconds
and che on/C w/// have reCurn Co che forev/ous seCC,inj before chande,
172 Make sure your TV ,;s conneo_ed w,;ch OomponenC ¼;dec ouCpuC f_om c,ee
ZgV,3un,_ and is now swiCched Co view such /bpuC C,eroud,ewhich
Progressive Scan s/]qna/s are Cransm/_Cefl. _here w/;// be no video s/_dna/
from AV ouCpuC,in case you have boCh OornponenC ¼Weeand/IV
oonneoC/ons,
4. A message requesting for confirmation will appear on screen. Select
YesEeenfirm orNo returntoprevioussettingJby Cii£ b
and press OK to confirm.
SOI3ND
Pro Logic
Domby Digital
DRC
Press OKto turn on/off. This controls the Dynamic Range Compression
(DRC) for night time listening. DRC reduces the difference between normal
voices and sounds such as like explosion to avoid waking your neighbeurs.
The amount of range control available depends on the disc.
Digita! Output
Press OKto check the box if you have connected the unit's digital audio
output to a receiver with Delby Digital or DTS.
Three options are available to adjust your speakers setting to
best fit your listening environment.
Speakers
You can indicate the presence and size of speakers you have
connected to your system within this menu. Options available are
as below. Press OKte confirm your selections.
To Next Page
