BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm 5-5
Operation 5
4 wheel steering
4 wheel steering is used for fast loading operations in confined spaces
where only small turning circles are possible.
Danger of accident when changing steering mode during machine
travel!
Can cause serious injury or death.
► Change the steering mode only at a standstill or at walking speed.
Enabling 4 wheel steering
1. Stop the machine or slow it down with the brakes to walking speed.
2. Set the steering to straight ahead.
3. Slide the lock in switch 54 downward and press the switch to position A
at the same time.
If the symbols E/1 und E/3 appear alternately in the digital display:
4. Turn the steering wheel to the left and/or right until the wheels of the
front and rear axles have reached or passed through the straight-
ahead position from both directions.
➥ Symbol E/3 appears permanently in the digital display.
➥ 4 wheel steering is in operation.
If the machine is equipped with the "high speed option," switching over to
all-wheel steering automatically reduces the speed to 20 km/h (12.43
mph)!
To Next Page
Loading...
