5-6 BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm
5 Operation
Front axle steering
Front axle steering is used for fast transport and road travel.
Front axle steering has to be selected for trailer operation or high-speed
machine travel (30 or 40 kph/18.64 or 24.85 mph) on public roads.
Danger of accident when changing steering mode during machine
travel!
Can cause serious injury or death.
► Change the steering mode only at a standstill or at walking speed.
Enabling front axle steering
1. Stop the machine or slow it down with the brakes to walking speed.
2. Set the steering to straight ahead.
3. Slide the lock in switch 54 downward and press the switch to position B
at the same time.
If the symbols E/1 und E/2 appear alternately in the digital display:
4. Turn the steering wheel to the left and/or right until the wheels of the
front and rear axles have reached or passed through the straight-
ahead position from both directions.
➥ Symbol E/2 appears permanently in the digital display.
➥ Front axle steering is in operation.
To Next Page
Loading...
