BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm 5-45
Operation 5
Important information on the front/rear additional control circuits
Connecting the flexible lines incorrectly results in incorrect
operation and/or uncontrolled movements of the attachment!
Failure to observe this can cause serious injury or death.
► Ensure that the hose pipes are connected correctly.
► Follow the instructions in the Operator’s Manual of the attachment
manufacturer.
► Check the response direction of the control elements before using the
attachment.
In order to avoid leaks on the plug couplings and dirt in the hydraulic oil:
► carefully clean the plug couplings and flexible lines before connecting
them.
Damage hazard to the machine and/or the attachment!
► Check the flow rate of the attachment before putting it into operation.
► Refer to the Operator’s Manual of the attachment.
► When removing the attachment, always ensure that all hydraulic lines
are disconnected.
To Next Page
Loading...
