5-54 BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm
5 Operation
7-pole front socket (option)
Important information about putting the machine into operation
The machine is equipped with an optional 7-pole socket A (at the front left
on the loader unit) for electrical attachments.
The front socket option is available in two variants:
• With one electrical circuit if the machine is equipped with the “Bucket
repositioning” option.
• With two electrical circuits if the “Bucket repositioning” option is not
installed.
In order to avoid faulty operation and/or damage to the attachment, before
taking the attachment into service, the assignment of the individual circuits
in the electric plug connection of the attachment must be checked for the
assignment and operation of the 7-pole plug receptacle.
► Have troubleshooting only performed by an authorized service center.
► The assignment of the circuits (pin) in the 7-pole plug receptacle is
listed in the wiring diagram (see system manual of the vehicle).
To Next Page
Loading...
