5-96 BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm
5 Operation
Picking up material with the pallet forks
Tipping hazard of machine due to failure to pay attention to the load
diagram!
Can cause serious injury or death.
► Pay attention to the load diagram in the cabin.
Switch off the load stabilizer (optional) to allow for an exact pick-up of the
load.
1. Move the machine up to the load so that the pallet forks or the fork
arms are at a right angle to the load.
➥ The fork arms must be the furthest possible apart, and at an equal
distance from the left and right side of the load.
2. Drive the vehicle forward. Move the fork arms as far as possible
underneath the pallet until the material touches the fork frame.
3. Raise the load carefully and tilt it in slightly
Fig. 209
Ansicht_021.iso
Ansicht_022.iso
Ansicht_023.iso
To Next Page
Loading...
