EasyManua.ls Logo

Kramer 8115

Kramer 8115
422 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7-4 BA 35203_04 * 3.0 * 35203_04_07_Wartung.fm
7 Maintenance
Inspection work
1
() :
Service
centre
User/operator Service centre
Delivery
inspection
Every 10 o/h
(once a day)
Every 20 o/h
“A”
1st Inspection
at 100 o/h
“B” 2nd Inspection
then every
500 o/h
“C”
every 1500 o/h
once a year
Engine oil: check the fill level. ●●
Hydraulic oil: check the fill level
●●
Check the hydraulic oil tank for condensation water.
2
●●
Clean the suction filter of the hydraulic system
(suction filter insert on hydraulic tank).
Check coolant fill level
3, 4
●●
Clean the coolant level sensor.
●●
Check gear oil fill level in front and rear axle differential.
●●
Check gear oil fill level in the gearbox.
●●
Check gear oil fill level in front and rear axle, check
the left and right fill level.
●●
Check the brake fluid (ATF) fill level,
top off (or have topped off) if necessary.
3, 5
●●
Drive system: check and if necessary correct the
variable displacement motor of the variable
displacement motor by means of the test report.
6
●●
Check water/oil cooler for contamination and clean it
if necessary.
7
●●
Check the intercooler (diesel engine) for contamination,
clean if necessary.
7
●●
Check the heater box (air conditioning option) for
contamination, clean it if necessary.
7
●●
Clean dust valve (air cleaner housing).
●●
Check all pressure accumulators,
correct the pressure level if necessary.
8
●●
Check the area around the pedals. Clean them and
apply grease or oil if necessary.
●●
Check the locks/door arrester. Clean them and apply
grease or oil if necessary.
●●
Check condition and pre-tension of V-ribbed belt
9
(water pump and generator), re-tension or replace it if
necessary
●●
Check condition and pretension of V-belt
(compressed-air trailer brake), have it retightened or
replaced if necessary.
●●
Check condition and pretension of V-belt (air condi-
tioning), have it retightened or replaced if necessary.
●●
Fuel pre-filter: drain the water.
●●

Table of Contents

Related product manuals