9-28 BA 35203_04 * 3.0 * 35203_04_09_Technische_Daten.fm
9 Technical data
Dimensions with KRAMER bucket (model 352-04S/352-04L)
Dimension Model 352-04S Model 352-04L
A Overall length
1
5800 mm (228,346 in) 5800 mm (228,346 in)
B Overall height
2, 3
2680 mm (105,512 in) 2680 mm (105,512 in)
C Overall height with rotating beacon
2
2910 mm (114,567 in) 2910 mm (114,567 in)
D Overall width without bucket
2, 4
1970 mm (77,559 in) 1970 mm (77,559 in)
D Overall width with bucket
1
2150 mm (84,646 in) 2150 mm (84,646 in)
E Ground clearance in transport position of loader unit 200 mm (7,874 in) 200 mm (7,874 in)
F Ground clearance under gearbox
2
390 mm (15,354 in) 390 mm (15,354 in)
G Pin height
2
3450 mm (135.83 in) 3640 mm (143,307 in)
H Load-over height
2
3200 mm (125,984 in) 3430 mm (135,039 in)
I Tilt-out height
2
2650 mm (104,331 in) 2970 mm (116,929 in)
J Tilt reach
2
660 mm (29,528 in) 490 mm (19,291 in)
K Tilt-in angle 50° 50°
L Tilt-out angle 45° 35°
M Front/rear track width
2, 5
1490 mm (58.66 in) 1490 mm (58.66 in)
N Wheelbase (front/rear axles) 2150 mm (84,646 in) 2150 mm (84,646 in)
O Wheelbase (rear axle/rear of machine) 1620 mm (63,780 in) 1620 mm (63,780 in)
P Wheelbase (front axle – bucket) 2030 mm (79.92 in) 2030 mm (79.92 in)
– Turning radius
2, 6
3000 mm (118.11 in) 3000 mm (118.11 in)
1. With standard bucket1000154387
2. With tyres 405/70-24 MPT-04
3. 2790 mm with protective FOPS screen (option)
4. With outside mirrors folded in
5. Wheel offset = 20
6. Measured above the bucket at the outer edge of the wheels
To Next Page
Loading...
