Defining Remote Buttons Functionality
KIT-400T includes remote contact closure switches . You can define the functionality of
these buttons via the embedded webpages.
To define the contact closure switches behavior:
1. In the Navigation pane, click Device Settings. The Switching page appears, showing
the General settings tab.
Figure 18: Device Settings Page – General Settings Tab
2. Select Remote Button behavior:
▪ Preset (default) – The remote contact-closure switches connected to the 5-pin
terminal block connector on KIT-400T operate according to their preset functions
(SELECT, IN 4, VOL UP and VOL DN), as printed on the panel of the device
See Using Remote Control Switches on page 12.
▪ Custom – The remote contact-closure switches connected to the 5-pin terminal
block connector on KIT-400T are defined by the user for use as Maestro Triggers to
send Maestro Script (e.g., closing the lights and opening a projector screen upon
HDMI trigger). See Configuring Device Automation on page 43.
Remote contact closure switches behavior is defined.
To Next Page
Loading...
