Kramer VIA GO2 User Manual

Kramer Electronics Ltd.
VIA GO² – For Web Administrator: Configuring Settings – Gateway Management Pages
18
2. Click Client Mode.
3. Click OK for the notification.
The Client Mode tab appears.
Figure 14: Client Mode Tab
4. If you do not see the desired network in the dropdown, click Click Here to Scan all
Networks.
5. Select an available network from the drop-down.
6. Enter the network password and click Apply.
Figure 15: Client Mode Setting Page
7. Disconnect the LAN cable (if connected) and reboot the device.
Client Wi-Fi Mode is set up.

Kramer VIA GO2 Specifications

General

Brand	Kramer
Model	VIA GO2
Category	Conference System
Language	English