Kramer VS-1616A

Viewing the MENU Commands Sequence
45
45
(SYNC from Matrix) setting
Figure 21: Choosing the MTX (SYNC from Matrix) Setting
8.4.2 Configuring a SWITCHING METHOD
To choose a SWITCHING METHOD setting, do the following:
1. Press the MENU button until you reach the SWITCHING METHOD
setting.
The MATRIX Display shows the message:
SWITCHING METHOD setting
yes -> TAKE, next -> MENU
2. Press the TAKE button.
The Displays show the messages:
Use OUTkey to configure
1: Immediate 4: Video SYNC
Current
Immediate
1
3. Press OUT button 1 or 4. For example, OUT button # 4 to set the
MATRIX sync configuration.
The TAKE LED blinks and the MATRIX Display shows the message:
Press TAKE to configure
from MATRIX
4. Press the TAKE button.
The Displays show the messages:
SWITCHING METHOD
changed
current:
From MATRIX
1 Indicating that the machine is currently set to the immediate switching method setting