Kramer VS-1616A - Choosing the COMMUNICATION Setting; Setting the IR REMOTE Control

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Viewing the MENU Commands Sequence
48
3. Press the OUT button 1.
The TAKE LED blinks and the Displays show the messages:
Scroll switcher setup?
Press TAKE to execute
Current:
OUTs/INs
4. Press the TAKE button.
The Displays show the messages:
display mode
changed
Current:
SETUP
8.8 Choosing the COMMUNICATION Setting
Choose the response option (reply or no reply).
To choose the No Reply response option, for example, do the following:
1. Press the MENU button until you reach the COMMUNICATION
setting.
The MATRIX Display shows the message:
COMMUNICATION setting
yes -> TAKE, next -> MENU
2. Press the TAKE button.
The MATRIX Display shows the message:
Use OUTkey to configure
1: REPLY 2: No Reply
3. Press the OUT button 2.
The TAKE LED blinks and the Displays show the messages:
Set serial port No reply
Press TAKE to execute
Current:
Reply
4. Press the TAKE button again.
The Displays show the messages:
SWITCHER RESPONSE
changed
Current:
No reply
8.9 Setting the IR REMOTE Control
Set the IR REMOTE control to enable remote control of the VS-1616A
16x16 Balanced Stereo Audio Matrix Switcher, using the Kramer RC-IR2