8.5 Choosing the Extended Keyboard Setting
Section
6.9 describes how to connect a remote unit. Activate or deactivate
it by setting the extended Keyboard setting ON or OFF.
To set the extended KEYBOARD mode, do the following:
1. Press the MENU button until reaching the extended Keyboard setting.
The MATRIX Display shows the message:
extended KEYBOARD setting
yes -> TAKE, next -> MENU
2. Press the TAKE button.
The Displays show the messages:
Outkey 1: External keys OFF
2: External keys ON
current:
X-key ON
1
3. Press the OUT button 1 to deactivate the External keys.
The TAKE LED blinks and the Displays show the messages:
Turn OFF external keys?
Press TAKE to execute
current:
X-key ON
4. Press the TAKE button.
The Displays show the messages:
External Keyboard mode
changed
current:
X-key OFF
8.6 Setting the STORE/RECALL KEYBOARD Mode
Choose one of these STORE/RECALL KEYBOARD modes:
• At ONCE mode in which setups are stored/recalled immediately
without the need for user confirmation
• CONFIRM mode in which storing/recalling setups require user
confirmation. The CONFIRM mode is the default
2
To set the STORE/RECALL KEYBOARD mode to the AT ONCE mode,
instead of the CONFIRM (default) mode, do the following:
for
storing/recalling setups and is recommended to prevent
erroneously storing/recalling of setups
1. Press the MENU button until reaching the STORE/RECALL setting.
The MATRIX Display shows the message:
1 Indicating that the external keys are currently activated
2 The AT ONCE mode is the default for all actions except storing/recalling setups
To Next Page
Loading...
