Contents
Introduction 1
Getting Started 1
Overview 2
Typical Applications 3
Defining VW-16 4X4 Video Wall Driver 4
Mounting VW-16 6
Connecting VW-16 7
Connecting the Output to an Unbalanced/Balanced Stereo Audio Acceptor 8
Connecting to VW-16 via RS-232 8
Operating and Controlling VW-16 9
Using Front Panel Buttons 9
Controlling Device via OSD Menu 10
Operating via Ethernet 16
Acquiring and Setting Current EDID Using RS-232 Serial Commands 19
Using VW-16 Embedded Webpages 20
Browsing VW-16 Webpages 21
Configuring the Screen Settings 22
Configuring the Output Resolution Settings 24
Managing EDID 24
Configuring the Screen Layout 25
Setting Up the Multi-Viewer Video Wall Page 26
Defining System Settings 32
Viewing the Ethernet Type (Static or HDCP) 32
Viewing the MAC Address 32
Changing the IP Address 32
Setting the Unit’s ID 33
Viewing the Fan Speed 34
Resting the VW-16 to its Factory Default 34
Resetting Device 34
Upgrading Firmware 35
Technical Specifications 36
Default Communication Parameters 37
Default EDID 37
Protocol 3000 40
Understanding Protocol 3000 40
Protocol 3000 Commands 41
Result and Error Codes 54
To Next Page
Loading...
Need help?
General
