Kramer VW-16

Kramer Electronics Ltd.
VW-16 – Operating and Controlling VW-16
10
Controlling Device via OSD Menu
Use the OSD buttons to control the VW-16 via the OSD menu.
The default OSD timeout is set to 30 seconds.
• Configuring Screen Setting Parameters on page 11.
• Configuring the Video Wall on page 12.
• Configuring the Multi-Viewer on page 13.
• Configuring the System on page 14.
• Viewing Device Information on page 16.
Navigating OSD Buttons
VW-16 enables you to control and define the device parameters via the OSD with the use of
the front panel MENU buttons.
To enter and use the OSD menu buttons:
1. Press MENU.
2. Press:
▪ ENTER to accept changes and to change the menu settings.
▪ Arrow buttons to move through the OSD menu, which is displayed on the video
output.
▪ To exit the menu, select EXIT.
To return to the previous menu level, press the front panel MENU button. All settings and
adjustments are automatically saved in non-volatile memory for each of the inputs.
The values defined in the different menus may change according to the firmware version (you
can download the up-to-date firmware version from our Web site at
www.kramerav.com/support/product_downloads.asp).