Kramer VW-16

Kramer Electronics Ltd.
VW-16 – Using VW-16 Embedded Webpages
28
3. In Aspect ratio, select the down arrow and choose from one the following aspect ratios:
Option
Description
Full
Enlarge to full screen size.
Best Fit
Keep the original aspect ratio.
Follow input
Keep the original aspect ratio and enlarge to the screen automatically
either horizontal or vertical dimension.
4. Click Apply.
The layout setting is configured.
To change a Pre-defined layout setting:
1. From the Navigation List, select Multi-Viewer > Layout settings.
2. In Pre-defined, select a Layout.
3. In the graphic layout area, click the monitor icon. The Quadview input window opens.
4. Select the Channel down arrow and choose an input (INPUT 1-4).
Note – The input is the video source for output when in single source video wall display
mode.
5. To save the changes, click Apply.
The source input channel is changed.
To return to the original Pre-defined layout settings, click Reset.
Option 2: Configure the Custom Layout Settings
VW-16 has a maximum of 7 sets of custom screen layouts that users can define and store.
Users can reset and restore the custom screen layout at any time.
There are two ways to define the custom layout:
• Move the slider to set the size and position of the window.
Figure 18: Webpages – Adjusting the Slider in Custom Layout