Kreg KPHA750 - User Manual

English
2
French (N. America)
19
Spanish (N. America)
37
French
55
Spanish
73
German
91
OWNER’S MANUAL
We’re here to help.
We want you to have an exceptional project building experience.
If you have questions or need support, please get in touch.
1-800-447-8638 | technicalsupport@kregtool.com
Tell us about your experience.
Your opinion counts. And we’re always looking for ways to improve.
Share your feedback so we can keep growing and innovating for you.
www.kregtool.com/feedback
WARNING Every user must read and follow instructions and safety precautions in this manual.
Failure to do so could result in serious injury. Save manual for future reference.
KPHA750 Pocket-Hole Jig
Docking Station
For use with Kreg 500-Series and 700-Series
Pocket-Hole Jigs

Summary

Safety Precautions

Pre-Assembly

Assembly: For 500-Series Jig

Assemble the Dock Base

Instructions for building the base structure of the docking station.

Connect the 500-Series Jig to the Dock Base

Steps to attach the Kreg 500-Series Jig to the assembled docking station base.

Connect the Material Support Wings to the Dock Base

How to attach the material support wings to the assembled dock base.

Assembly: For 700-Series Jig

Connect the Dock Adapters to the 700-Series Jig

Attaching the specific adapters for the 700-Series Jig to the jig itself.

Connect the Material Support Wings to the Dock Adapters

Assembly: Adjustable Stop

Assemble the Adjustable Stop Base

Attach the Adjustable Stop Arm to the Adjustable Stop Base

Operation - Using the Adjustable Stop

Set Up the Adjustable Stop

Place the Adjustable Stop in Position

Kreg KPHA750 Specifications

General

Brand	Kreg
Model	KPHA750
Category	Docking Station
Language	English