Safety
23
1)
Before starting the machine,
read and observe the
operating instructions and
safety instructions.
Order no. 939 471-1 (1x)
2)
The PTO speeds must not exceed 540 rpm! The
operating pressure of the hydraulic system must
not exceed 200 bar!
939 100-4
MAX. 540/min
MAX. 200 bar
Order No. 939 100-4 (1x)
3) Order No. 939 576-0 (3x)
a) Caution: some machine parts will stay in
operation for an extended period of time before
being switched off completely. Do not touch any
moving parts of the machine. Wait until they
have come to a complete stop.
b) Move the protective devices into position prior
to start-up.
c) When the machine is running, keep your
distance.
939 410 2
STOP
939 572-0
942 197-1
3a
3b 3c
4)
While parts are moving, never reach into areas
where there is a risk of being crushed.
942 459-0
Order No. 942 459-0 (5x)
5)
Keep the stipulated safe distance from power
transmission lines.
Order No. 942 293-0 (1x)
Pos: 13.14 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
To Next Page
Loading...
