Krone EasyCut 320 - Mower Drive Gearbox

Maintenance
53
Pos: 25.22.1 /Überschriften/Überschriften 2/K-O/MMäherantriebsgetriebe @ 9\mod_1221045800746_78.docx @ 131475 @ 2 @ 1
10.6 Mower Drive Gearbox
Pos: 25.22.2 /BA/Wartung/Ölkontrolle_Wechsel/Mähwerke/Bild Mäherantriebsgetriebe EC 280/320 @ 9\mod_1221045935246_78.docx @ 131519 @ @ 1
EC-170-1
Figure
23
Pos: 25.22.3 /BA/Wartung/Ölkontrolle_Wechsel/Ölkontrolle_ALT/Ölkontrolle SAE 90 @ 0\mod_1197008973815_78.docx @ 15649 @ @ 1
Oil level check:
• For time intervals, see Chapter "Oil Level Check and Oil Change Intervals (Gearboxes)".
• Unscrew the inspection screw (1)
• Oil level up to bore hole (1)
• If necessary, top up the oil (SAE 90)
• Screw the check screw (1) back in.
Pos: 25.22.4 /BA/Wartung/Ölkontrolle_Wechsel/Ölwechsel_ALT/Ölwechsel Version5 @ 9\mod_1221047052043_78.docx @ 131562 @ @ 1
Oil change:
• For time intervals, see Chapter "Oil Level Check and Oil Change Intervals (Gearboxes)".
• Screw out the oil drain plug (1)
• Collect the used oil in a suitable drip pan
• Screw in the oil drain plug (1)
• Top up the oil (2) (oil level up to hole (1))
Pos: 25.22.5 /BA/Wartung/Ölkontrolle_Wechsel/Ölqualität /Ölmenge: siehe Kapitel @ 0\mod_1197007859486_78.docx @ 15531 @ @ 1
Oil quality / oil quantity: see Chapter "Filling Quantities and Lubricant Designations for
Gearboxes"
Pos: 25.22.6 /BA/Wartung/Ölkontrolle_Wechsel/Hinweis - Altöl ordnungsgemäß entsorgen @ 0\mod_1197008117002_78.docx @ 15550 @ @ 1
Note
The used oil must be disposed of correctly
Pos: 25.23 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1