Krone EasyCut 320 - Before Mowing

Operation
39
Pos: 21.8 /Überschriften/Überschriften 2/U-Z/VVor dem Mäheinsatz @ 3\mod_1204788384465_78.docx @ 73168 @ 2 @ 1
8.2 Before mowing
Pos: 21.9 /BA/Sicherheit/7. Gefahrenhinweise alt/Mähwerke/Gefahr - Arbeitseinsatz / Mähen @ 73\mod_1307695972255_78.docx @ 654926 @ @ 1
DANGER! - Using the machine for work
Effect: Danger to life, injuries or damage to the machine.
• The glide skids must rest on the ground before start-up and during work
• Maintain an adequate safety distance from the cutting tools during operation
• There is danger of foreign objects being forcibly ejected even when the machine is
operated properly. Persons must therefore be directed out of the danger zone of the
machine.
• Special care should be taken when working near roads and buildings)
Pos: 21.10 /BA/Sicherheit/7. Gefahrenhinweise alt/MähwerkeWarnung - Unerwartete Bewegung der Schneidwerkzeuge bzw. des Mähwerkes @ 299\mod_1412937148121_78.docx @ 2341087 @ @ 1
WARNING!
Foreign bodies may be hurled up during the operation. Thus there is a risk for persons
staying in the danger zone to be seriously hurt or killed.
Therefore the following points must be observed before the machine is used:
• The mower must be in working position.
• Move protective equipment into protective position and make sure that it is not damaged.
• Replace damaged protective equipment immediately.
• Instruct persons to leave the danger zone.
• Special care should be taken when working near roads and buildings.
• Make sure each time before the mower is used that blades, retaining bolts, leaf springs and
cutting discs or mower drums are not damaged, worn or missing; replace them, if
necessary!
Pos: 21.11 /BA/Bedienung /EasyCut/Hinweis Beim Mähen Steuerventil schwimmstellung/senken @ 9\mod_1220881412391_78.docx @ 128661 @ @ 1
Note! - While mowing
Effect: Proper use of the machine
• Leave control unit(s) in the "Lower" or "Float position" position for work.
Pos: 21.12 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1