Krone EasyCut 320 - PTO Shaft Operations

Commissioning
28
Pos: 15.14 /Überschriften/Überschriften 2/F-J/GGelenkwelle @ 0\mod_1199781879794_78.docx @ 34542 @ 2 @ 1
5.4 PTO shaft
Pos: 15.15 /Überschriften/Überschriften 3/K-O/LLängenanpassung @ 1\mod_1201687632810_78.docx @ 53589 @ 3 @ 1
5.4.1 Length adjustment
Pos: 15.16 /BA/Sicherheit/6. Überarbeitete Warnhinweise/Warnung - Unbeabsichtigtes Abkuppeln angebaute @ 291\mod_1410427253866_78.docx @ 2294307 @ @ 1
Danger! - Inadvertent uncoupling of the machine during road travel or work.
Effect: Danger to life, serious injuries or serious damage to the machine.
• Use extreme caution when attaching or detaching devices to or from the tractor! The
accident prevention regulations must be complied with absolutely.
• The lower suspension arms on the tractor must be fixed in position
with the retaining chains or bars to prevent the machine from swivelling out during transport
or work. If the lower suspension arms (1) are equipped with catch hooks, the following
items must be taken into consideration:
Especially in the headland position, high forces develop in the lower suspension arm bolts (3)
that act upwards in the left-hand hook.
For this reason, the catch hooks must be in a flawless condition.
Additionally, the catch hooks must be secured in the provided locking hole (4) against
unwanted opening after the machine has been connected to the tractor.
Pos: 15.17 /BA/Erstinbetriebnahme/EasyCut/Ankuppeln Bild EC 280/320 @ 9\mod_1220537315742_78.docx @ 126927 @ @ 1
EC-159-1
1
2
3
4
1
Figure
5
Pos: 15.18 /BA/Erstinbetriebnahme/EasyCut/Ankuppeln Text EC 280/320 (280/320CV-Q) @ 9\mod_1220537421383_78.docx @ 126948 @ @ 1
• Attach the machine onto the lower suspension arm (1) of the tractor.
• Hook the top link (2) into the upper hole of the 3-point support.
Pos: 15.19 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1