Krone EasyCut 320 - Abrasion Limit

Maintenance
61
Pos: 25.26.18 /BA/Wartung/Mähwerke/Verschleissgrenze für Auswaschungen @ 0\mod_1197268738875_78.docx @ 16502 @ 3 @ 1
10.8.6 Abrasion Limit
Danger! - Abrasion on the cutting discs / blade drums
Effect: Danger to life or serious injuries.
• The abrasion limit (2) will be achieved if the min. material thickness of 3 mm is no longer
given.
EC-226-0
2
2
Fig.
31
Note
If cutting discs or blade drums show deformations or wear in form of abrasions (2) or similar,
these components have to be replaced by Original Krone spare parts .
Pos: 25.26.19 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1