Driving and Transport
37
Pos: 19.7 /BA/Fahren und Transport/EasyCut/Fahren-Transport Bild EC 280/320 @ 9\mod_1220877620235_78.docx @ 128377 @ @ 1
Figure
Pos: 19.8 /BA/Fahren und Transport/EasyCut/Fahren/Transport Text EC 280/320 @ 9\mod_1220877708204_78.docx @ 128398 @ @ 1
During transport / road travel the disc mower must be folded up.
To do this:
Swivel the parking support (1) into transport position and lock it into position with the bolt
(see chapter on start-up entitled "Swivelling the parking support into transport position").
• To release the locking mechanism (2), pull the actuating rope (3) up from the tractor.
• Actuate the control valve for the hydraulic cylinder on the tractor. The mowing unit lifts up
into the transport position.
• Lower the locking mechanism (2).
• Close the hydraulic shut-off valve.
Make sure that the flap protection is locked into protective position and secured by the spring
cotter (4).
Pos: 20 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
To Next Page
Loading...
