KSB Guard - Connecting Gateway to Power Supply

5 Installation/ Commissioning
20 of 50
KSB Guard
4079.83/01-EN
1
1
Fig.8: Fastening the flameproof enclosure
1 Holes for wall mounting
1. Fasten the flameproof enclosure to a suitable wall with four screws (M10).
5.2.1.3 Connecting KSBGuardGateway to the power supply
DANGER
Opening the flameproof enclosure
Explosion hazard!
▷ Never open the flameproof enclosure of KSBGuardGateway.
▷ Electrical work in the terminal box may only be carried out by a qualified
electrical technician.