8 Dismantling
37 of 50
KSB Guard
4079.83/01-EN
8.3 Dismantling the sensor unit
DANGER
Strong magnetic field
Danger of death for persons with pacemaker!
Interference with magnetic data carriers, electronic devices, components and
instruments!
Uncontrolled magnetic attraction forces between magnet-equipped components,
tools or similar!
▷ Keep a safety distance of at least 0.3m.
WARNING
Work in the immediate vicinity of rotating parts
Risk of hand injury!
▷ Always have this work performed by trained personnel.
▷ Take particular caution when performing this work.
WARNING
Hot surfaces (pump and piping take on the temperature of the fluid handled).
Risk of burns!
▷ Do not touch hot surfaces.
ü The connecting cable leading to the Transmission and battery unit has been
removed.
1. Carefully remove the sensor unit from the installation location. To do so use a
soft-face mallet or plier wrench, for example.
To Next Page
Loading...