KSB Guard - Installation and Commissioning; Accessing the KSB Guard System; Installation Procedures; Fitting the KSB Guard Gateway

5 Installation/ Commissioning
18 of 50
KSB Guard
4079.83/01-EN
5 Installation/ Commissioning
5.1 Setting up access to the KSBGuard system
Send the following information to this e-mail address:
▪ E-mail: ksbguard-support@ksb.com
Table10: Required data
Required data Notes
Organisation’s name
(e.g. company name, such as XY Industrial
Estate, Exampleville Waterworks.)
Company's post/ zip code
Company’s city
Company’s country
Company’s customer number (at KSB if
applicable)
Administrator’s name
(the first company employee who is to have
access to/ use the KSBGuard. This person can
then add further users.)
Administrator’s e-mail address
A customer account will be created with this data.
A system-generated welcome e-mail will be sent to the e-mail address entered. This
e-mail will also contain a prompt to change the initial password.
5.2 Installation
NOTE
For all queries relating to the actual installation (e.g. positioning of components,
reception quality, etc.) KSBGuard Support will be available. (ðSection9,Page38)
5.2.1 Fitting KSBGuardGateway
DANGER
Sparks produced during installation work or servicing work
Explosion hazard!
▷ Observe the safety regulations in force at the place of installation.
▷ Always perform installation work or maintenance work on explosion-proof
devices outside of potentially explosive atmospheres.
DANGER
Risk of falling when working at a great height
Danger to life by falling from a great height!
▷ Do not step onto the pump (set) during installation work or dismantling work.
▷ Pay attention to safety equipment, such as railings, covers, barriers, etc.
▷ Observe the applicable local health and occupational safety regulations and
accident prevention regulations.