KTM 300 EXC - 22.3.1 Carburetor Tuning

TECHNICAL DATA 22
137
Stud, cylinder base M10 20 Nm (14.8 lbf ft)
Lubricated with engine oil
Nut, rotor M12x1 55 Nm (40.6 lbf ft)
Gear oil drain plug with magnet M12x1.5 20 Nm (14.8 lbf ft)
Spark plug M14x1.25 25 Nm (18.4 lbf ft)
Nut, inner clutch hub M18x1.5 100 Nm (73.8 lbf ft)
Loctite
®
648™
Nut, primary gear wheel M18LHx1.5 150 Nm (110.6 lbf ft)
Loctite
®
648™