KTM 300 EXC - Page 147

SUBSTANCES 23
145
Recommended supplier
MOTOREX
®
– Cross Power 2T
Fork oil (SAE 4) (48601166S1)
Standard/classification
– SAE ( p. 148) (SAE 4)
Guideline
– Use only oils that comply with the specified standards (see specifications on the container) and that exhibit
the corresponding properties.
Shock absorber fluid (SAE 2.5) (50180751S1)
Standard/classification
– SAE ( p. 148) (SAE 2.5)
Guideline
– Use only oils that comply with the specified standards (see specifications on the container) and that exhibit
the corresponding properties.
Super unleaded, type C (ROZ 95/RON 95/PON 91 mixed with 2-stroke engine oil, 1:60)
Standard/classification
– ANP (Agência Nacional do Petróleo) #57 (ROZ 95/RON 95/PON 91 mixed with 2-stroke engine oil)
– JASO FD ( p. 148) (1:60)
Mixture ratio
1:60 Engine oil, 2-stroke ( p. 144)
Super unleaded, type C (ROZ 95/RON 95/PON 91) ( p. 145)
Recommended supplier
MOTOREX
®
– Cross Power 2T
Super unleaded, type C (ROZ 95/RON 95/PON 91)
Standard/classification
– ANP (Agência Nacional do Petróleo) #57 (ROZ 95/RON 95/PON 91)
Guideline
– Only use super unleaded fuel that matches or is equivalent to the following specifications.
– Super unleaded fuel with an ethanol content of 19 to 27% is permissible.
Info
Do not use fuel made of methanol (e.g., M15, M85, M100).
Do not use fuel with less than 19% ethanol (e.g., E10).
Do not use fuel with more than 27% ethanol (e.g., E30, E85, E100).