KTM 690 - Page 98

SUBSTANCES 96
20SUBSTANCES
Super unleaded (ROZ 95 / RON 95 / PON 91)
According to
– DIN EN 228 (ROZ 95 / RON 95 / PON 91)
Super unleaded (ROZ 98 / RON 98 / PON 94)
According to
– DIN EN 228 (ROZ 98 / RON 98 / PON 94)
Hydraulic fluid (15)
According to
– ISO VG (15)
Guideline
– Use only hydraulic fluid that complies with the specified standards (see specifications on the container) and that possesses the
corresponding properties. KTM recommends Motorex
®
products.
Supplier
Motorex
–
Motorex
®
Hydraulic Fluid 75
Brake fluid DOT 5.1
According to
– DOT
Guideline
– Use only brake fluid that complies with the specified standards (see specifications on the container) and that possesses the corre-
sponding properties. KTM recommends Motorex
®
products.
Supplier
Motorex
–
Motorex
®
Brake Fluid DOT 5.1
Coolant
Guideline
– Use only suitable coolant (even in countries with high temperatures). Using inferior antifreeze can result in corrosion and foaming.
KTM recommends Motorex
®
products.
Mixture ratio
-25… -45 °C (-13… -49 °F) 50 % Anti-corrosion/antifreeze
50 % distilled water
Coolant (mixed ready to use)
Antifreeze -40 °C (-40 °F)
Supplier
Motorex
–
Motorex
®
Anti Freeze
Engine oil (SAE 10W/60)
According to
– JASO T903 MA ( P. 100)
– SAE ( P. 100) (SAE 10W/60)
Guideline
– Use only engine oils that comply with the specified standards (see specifications on the container) and that possess the corre-
sponding properties. KTM recommends Motorex
®
products.
Synthetic engine oil
Supplier
Motorex
–
Motorex
®
Power Synt 4T