ELECTRICAL SYSTEM 16
139
G05949-12
Main work
–
Turn adjusting screw
A
to adjust the headlight range.
Info
Turn clockwise to reduce the headlight range; turn
counterclockwise to increase the headlight range.
If you have a payload, you may have to correct the
headlight range.
400726-11
–
Set the headlight to marking
B
.
Guideline
The light-dark boundary must lie exactly on lower mark-
ing
B
when the motorcycle is ready to operate with the
rider mounted along with any luggage and a passenger, if
applicable.
16.10 Diagnostics connector
F01981-10
Diagnostics connector
1
is located under the battery cover.
16.11 Front ACC1 and ACC2
I00285-10
Installation location
–
The front power supplies ACC1
1
and ACC2
2
are located
in the right mask support.
Info
The front power supplies ACC1 and ACC2 can be accessed
behind the cover of the right mask support.