EasyManua.ls Logo

KTM 890 ADVENTURE R 2023 - Installing the 12-V Battery

KTM 890 ADVENTURE R 2023
183 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16 ELECTRICAL SYSTEM
132
16.3 Installing the 12-V battery
Warning
Risk of injuryBattery acid and battery gases cause serious chemical burns.
Keep 12 V batteries out of the reach of children.
Wear suitable protective clothing and safety glasses.
Avoid contact with battery acid and battery gases.
Keep sparks or open flames away from the 12 V battery.
Only charge 12 V batteries in well-ventilated rooms.
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
Rinse eyes with water for at least 15 minutes and consult a doctor immediately if battery acid and
battery gases get into the eyes.
Caution
Danger of accidentsElectronic components and safety devices will be damaged if the 12-V battery is dis-
charged or missing.
If the 12-V battery is discharged or defective, malfunctions in the vehicle electronics can occur, espe-
cially when starting.
Never operate the vehicle with a discharged 12-V battery or without a 12-V battery.
F03303-10
Main work
Position the 12-V battery in the battery compartment.
12-V battery (HTZ12A-BS) ( p. 161)
The battery terminals face opposite the direction of travel.
Connect positive cable
1
to the 12-V battery.
Guideline
Screw, battery termi-
nal
M6 4.5 Nm
(3.32 lbf ft)
Mount positive terminal cover
2
.
Connect negative cable
3
to the 12 V battery.
Guideline
Screw, battery termi-
nal
M6 4.5 Nm
(3.32 lbf ft)

Table of Contents

Other manuals for KTM 890 ADVENTURE R 2023

Related product manuals