7 COMBINATION INSTRUMENT
40
7.15 Ride‑Mode display
I00204-13
The Ride Mode ( p. 144) setting is shown in area
1
of the dis-
play.
The drive mode can be configured in the Ride Mode submenu.
7.16 ABS display
I00204-14
The ABS mode setting is shown in the
1
area of the display.
When the Ride Mode Rally ( p. 144) is activated, the ABS can be
configured in the ABS submenu.
7.17 MTC display
I00204-15
The
1
area of the display indicates whether MTC ( p. 144) is
switched on or off.
The motorcycle traction control can be switched on or off in
the MTC submenu.
7.18 Coolant temperature indicator
I00206-01
The coolant temperature is displayed by a symbol. The symbol
changes between LOW, OK and HOT depending on the temperature.
Note
Engine failure Overheating damages the engine.
– If the coolant temperature warning is displayed, stop imme-
diately and take care not to endanger yourself or other traffic
participants in the process.
– Allow the engine and cooling system to cool down.
– Check and, if necessary, correct the coolant level on the cool-
ing system while it is in a cooled state.
To Next Page
Loading...
