KTM 890 ADVENTURE R 2023 - Service Work on the Chassis; Raising the Motorcycle with Rear Lifting Gear; Removing the Rear of the Motorcycle from the Lifting Gear; Lifting the Motorcycle with the Front Lifting Gear

13 SERVICE WORK ON THE CHASSIS
94
13.1 Raising the motorcycle with rear lifting gear
Note
Danger of damage The parked vehicle can roll away or fall over.
– Park the vehicle on a firm and level surface.
402346-01
– Mount retaining adapter on the link fork.
– Insert adapter in the rear lifting gear.
Retaining adapter (61029955144)
Rear wheel work stand (69329955000)
– Stand motorcycle upright, align lifting gear to the link fork with
the adapters, and raise motorcycle.
13.2 Removing the rear of the motorcycle from the lifting gear
Note
Danger of damage The parked vehicle can roll away or fall over.
– Park the vehicle on a firm and level surface.
402029-10
– Secure the motorcycle against falling over.
– Remove the rear lifting gear and lean the vehicle on side
stand
1
.
– Remove the retaining adapter from the link fork.
13.3 Lifting the motorcycle with the front lifting gear
Note
Danger of damage The parked vehicle can roll away or fall over.
– Park the vehicle on a firm and level surface.
Preparatory work
– Raise motorcycle with rear lifting gear. ( p. 94)
– Remove the front fender. ( p. 107)
402345-01
Main work
– Move the handlebar to the straight-ahead position.
– Use suitable lifting gear when attaching the steering stem.
– Align the front lifting gear with the fork legs.
Info
Always raise the motorcycle at the rear first.
– Lift the motorcycle at the front.