KTM 890 ADVENTURE R 2023 User Manual

COMBINATION INSTRUMENT 7
59
Info
Press the UP or DOWN button until Delete Pairing is
highlighted. The paired device can be deleted by press-
ing the SET button.
Not every cellphone is suitable for pairing with the vehi-
cle.
– Move the previously paired device into the range of the vehicle
while the Bluetooth
®
function is active.
The device is automatically connected with the vehicle.
If the device is not automatically connected with the vehi-
cle after approx. 30 seconds:
– Switch on the vehicle again or repeat the New Pair-
ing procedure.
A suitable cellphone can be paired with the combination instru-
ment in the Phone Pairing submenu via Bluetooth
®
.
Info
Not every cellphone or headset is suitable for pairing with
the combination instrument.
Make sure that the end device is in the correct pairing
mode for call management. If the end device is only paired
for media playback, the call function may not work.
7.28.34 Riders Headset (optional)
I00238-01
Condition
• The motorcycle is stationary.
• Bluetooth
®
function is activated.
• The Bluetooth
®
function should also be activated in the device
to be paired.
– Press the SET button when the menu is closed.
– Press the UP or DOWN button until Settings is highlighted.
Press the SET button to open the menu.
– Press UP or DOWN button until KTMconnect (optional) is
marked. Press the SET button to open the menu.
– Press UP or DOWN button until Riders Headset is highlighted.
Press the SET button to open the menu.
– Press UP or DOWN button until New Pairing is marked. Press
the SET button to open the menu.
– The vehicle starts searching for a suitable headset. If the
search was successful, the name of the rider's headset is
displayed in the New Pairing submenu. Press the SET button to
start the pairing.
Info
The headset must be in pairing mode for the vehicle to
find the headset. Follow the instructions in the headset
owner's manual.
Press the UP or DOWN button until Delete Pairing is
highlighted. The paired device can be deleted by press-
ing the SET button.
Not every headset is suitable for pairing with the vehi-
cle.

KTM 890 ADVENTURE R 2023 Specifications

General

Engine Type	2-cylinder, 4-stroke, parallel twin
Displacement	889 cc
Transmission	6-speed
Front Suspension	WP XPLOR-USD, Ø 48 mm
Bore x Stroke	90.7 mm x 68.8 mm
Compression Ratio	13.5:1
Fuel System	Electronic Fuel Injection
Final Drive	Chain
Front Tire	90/90-21
Rear Tire	150/70-18
Cooling	Liquid cooled
Lubrication	Forced oil lubrication with 2 oil pumps
Frame	Chromium-Molybdenum-Steel frame using the engine as stressed element, powder coated
Power	105 hp (77 kW) @ 8, 000 rpm
Torque	100 Nm
Fuel Tank Capacity	20 liters
Seat Height	880 mm (34.6 in)
Dry Weight	196 kg (432 lb)
Rear Suspension	WP XPLOR PDS shock absorber
Front Brake	2x radially mounted 4-piston calipers
Rear Brake	2-piston floating caliper
ABS	Bosch 9.1 MP (incl. Cornering-ABS and offroad mode)
Wheels Front	21"
Wheels Rear	18"
Chain	520
Steering Head Angle	63.5°
Ground Clearance	263 mm