COMBINATION INSTRUMENT 7
45
Rain - Reduced homologated performance with soft
response for improved rideability on surfaces with low road
grip; the motorcycle traction control allows very little slip
on the rear wheel. ABS regulates both wheels.
Offroad- Reduced homologated performance for better
rideability on unpaved roads; the motorcycle traction con-
trol allows high slip on the rear wheel. ABS only controls
the front wheel.
Rally (optional) - Setting with homologated performance
and extremely direct response. The motorcycle traction
control and the characteristics of the throttle response can
be set individually. ABS can be configured separately.
The riding mode of the vehicle can be configured in the Ride Mode
menu.
7.28.3 ABS
I00213-01
Condition
• Model with RALLY PACK.
• Riding mode Rally (optional) is activated.
– Press the SET button when the menu is closed.
– Press the UP or DOWN button until Motorcycle is highlighted.
Press the SET button to open the menu.
– Press UP or DOWN button until ABS is highlighted. Press
the SET button to open the submenu.
– Activate the menu item using the UP or DOWN button.
Warning
Danger of accidents An incorrectly selected ABS mode
makes control of the vehicle considerably more diffi-
cult.
The ABS modes are each only suitable for certain
conditions.
– Always select an ABS mode that is compatible with
the surface of the ground.
– Press the SET button to select the desired ABS mode.
Info
The ABS mode can be switched during the journey.
Do not open the throttle during the selection.
When the ABS mode Road is active, ABS controls both
wheels.
When the Offroad ABS mode is active, ABS only con-
trols the front wheel. The rear wheel is no longer con-
trolled by ABS and may lock during braking maneuvers.
The indicator lamp ABS REAR lights up.
To Next Page
Loading...
