KTM 890 ADVENTURE R 2023 User Manual

23 TECHNICAL SPECIFICATIONS
158
Screw, locking lever M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, main shaft bearing support M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, oil pan M6x30 10 Nm (7.4 lbf ft)
Screw, oil pan M6x35 10 Nm (7.4 lbf ft)
Screw, oil pump cover M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, oil pump unit M6 10 Nm (7.4 lbf ft)
Screw, oil/water heat exchanger M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, shift drum locating M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, shift lever M6 14 Nm (10.3 lbf ft)
Loctite
®
243™
Screw, shift shaft retaining bracket M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, starter motor M6 10 Nm (7.4 lbf ft)
Screw, stator M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, stator M6 10 Nm (7.4 lbf ft)
Screw, timing chain shaft M6 10 Nm (7.4 lbf ft)
Screw, upper guide rail M6 8 Nm (5.9 lbf ft)
Loctite
®
243™
Screw, valve cover M6 10 Nm (7.4 lbf ft)
Screw, water pump cover M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, water pump wheel M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Nut, exhaust flange M8 15 Nm (11.1 lbf ft)
Copper paste
Nut, manifold on cylinder head M8 Tighten the nuts evenly. Do not
bend the metal.
13 Nm (9.6 lbf ft)
Copper paste
Oil nozzle for clutch lubrication M8 5 Nm (3.7 lbf ft)
Loctite
®
243™
Remaining screws for engine M8 20 Nm (14.8 lbf ft)
Screw plug, locking screw M8 15 Nm (11.1 lbf ft)
Screw, engine case M8x45 25 Nm (18.4 lbf ft)
Screw support greased
Screw, engine case M8x55 25 Nm (18.4 lbf ft)
Screw support greased
Screw, engine case M8x65 25 Nm (18.4 lbf ft)
Screw support greased
Screw, engine case M8x90 25 Nm (18.4 lbf ft)
Screw support greased
Screw, knock sensor M8 20 Nm (14.8 lbf ft)

KTM 890 ADVENTURE R 2023 Specifications

General

Engine Type	2-cylinder, 4-stroke, parallel twin
Displacement	889 cc
Transmission	6-speed
Front Suspension	WP XPLOR-USD, Ø 48 mm
Bore x Stroke	90.7 mm x 68.8 mm
Compression Ratio	13.5:1
Fuel System	Electronic Fuel Injection
Final Drive	Chain
Front Tire	90/90-21
Rear Tire	150/70-18
Cooling	Liquid cooled
Lubrication	Forced oil lubrication with 2 oil pumps
Frame	Chromium-Molybdenum-Steel frame using the engine as stressed element, powder coated
Power	105 hp (77 kW) @ 8, 000 rpm
Torque	100 Nm
Fuel Tank Capacity	20 liters
Seat Height	880 mm (34.6 in)
Dry Weight	196 kg (432 lb)
Rear Suspension	WP XPLOR PDS shock absorber
Front Brake	2x radially mounted 4-piston calipers
Rear Brake	2-piston floating caliper
ABS	Bosch 9.1 MP (incl. Cornering-ABS and offroad mode)
Wheels Front	21"
Wheels Rear	18"
Chain	520
Steering Head Angle	63.5°
Ground Clearance	263 mm