KTM F8101S5 - Adding Engine Oil

SERVICE WORK ON THE ENGINE 17
119
17.4 Adding engine oil
Info
Too little engine oil or poor-quality engine oil will result in premature wear of the engine.
0
0
401955-10
–
Remove oil filler plug
1
with the O-ring from the clutch
cover.
– Add the same engine oil used when the last oil change was
carried out.
Engine oil (SAE 10W/50) ( p. 138)
Info
For optimal performance of the engine oil, do not mix
different types of engine oil.
We recommended changing the engine oil when neces-
sary.
– Mount and tighten the filler plug together with the O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
– Always make sure there is sufficient ventilation
when running the engine.
– Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
– Start the engine and check for tightness.