TROUBLESHOOTING 23
135
Faults Possible cause Action
Blink code 45 on the vehicle Fault in the electric motor – Switch the main switch off and on.
Blink code 46 on the vehicle Error in the vehicle system
wiring harness or in a switch
–
Switch the main switch off and on.
– Check the vehicle system wiring har-
ness and plug-in connectors for exter-
nal damage.
Blink code 51 on the vehicle Electric motor control unit error – Switch the main switch off and on.
Blink code 52 on the vehicle Fault in the moisture monitor – Switch the main switch off and on.
Blink code 53 on the vehicle Error in the relay of the
Powerpack HV
– Switch the main switch off and on.
Blink code 54 on the vehicle Fault in the insulation monitor – Clean and dry the discharge plug and
discharge socket without compressed
air.
Speedometer values deleted
(time, stop watch, lap times)
The combination instrument
battery is empty
– Change combination instrument bat-
tery. ( p. 106)
The high beam, low beam,
position light, tail light, and
license plate lamp are not
working
Fuse 3 blown – Change the fuses of individual electri-
cal power consumers. ( p. 100)
The combination instrument,
horn, brake light, and turn sig-
nal are not working
Fuse 4 blown – Change the fuses of individual electri-
cal power consumers. ( p. 100)
To Next Page
Loading...
