KTM Freeride E-XC 2021 - Installing Front Fender

SERVICE WORK ON THE CHASSIS 13
67
E00985-10
Main work
–
Remove screws
1
.
–
Remove screws
2
.
– Take off the front fender.
13.15 Installing front fender
E00985-10
Main work
–
Position front fender. Mount and tighten screws
1
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
–
Mount and tighten screws
2
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
Finishing work
– Install the headlight mask with the headlight. ( p. 102)
– Install the Powerpack HV. ( p. 109)
– Lock the seat. ( p. 69)
– Check the headlight setting. ( p. 105)