KTM Freeride E-XC 2021 - Removing the Fork Legs

13 SERVICE WORK ON THE CHASSIS
58
13.3 Bleeding the fork legs
Preparatory work
– Deactivate the vehicle. ( p. 43)
– Fold the seat up. ( p. 69)
– Remove the Powerpack HV. ( p. 108)
– Mount the protection cap. ( p. 71)
– Raise the motorcycle with a lift stand. ( p. 57)
402556-10
Main work
–
Release bleeder screws
1
.
Any excess pressure escapes from the interior of the fork.
– Tighten the bleeder screws.
Finishing work
– Remove the motorcycle from the lift stand. ( p. 57)
– Install the Powerpack HV. ( p. 109)
– Lock the seat. ( p. 69)
13.4 Removing the fork protector
Preparatory work
– Deactivate the vehicle. ( p. 43)
– Fold the seat up. ( p. 69)
– Remove the Powerpack HV. ( p. 108)
– Mount the protection cap. ( p. 71)
F03122-10
Main work
–
Remove screws
1
. Take off the clamp.
–
Remove screws
2
on the left fork leg. Take off the fork pro-
tector.
F03123-10
–
Remove screws
3
on the right fork leg. Take off the fork pro-
tector.