KTM RC 200 User Manual

18 SERVICE WORK ON THE ENGINE 162
L02169-10
–
Remove screws

. Remove oil filter cover

with the O-ring.
–
Pull oil filter

out of the oil filter housing.
Circlip pliers reverse (51012011000)
– Completely drain the engine oil.
– Thoroughly clean the parts and sealing surface.
L02170-10
–
Insert oil filter

.
–
Lubricate the O-ring of the oil filter cover. Mount oil filter cover

.
– Mount and tighten the screws.
Guideline
Screw, oil filter cover (RC 125) M5 8 Nm (5.9 lbf ft)
Screw, oil filter cover (RC 125) M6 12 Nm (8.9 lbf ft)
Screw, oil filter cover (RC 200) M5 8 Nm (5.9 lbf ft)
Screw, oil filter cover (RC 200) M6 12 Nm (8.9 lbf ft)
Info
Too little engine oil or poor-quality engine oil results in premature wear of the
engine.

KTM RC 200 Specifications

General

Displacement	199.5 cc
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Rear Suspension	WP APEX Monoshock
Bore x Stroke	72 mm x 49 mm
Compression Ratio	11.5:1
Max Power	25 PS @ 10000 rpm
Max Torque	19.2 Nm @ 8000 rpm
Front Brake	300 mm disc
Rear Brake	230 mm disc
Fuel Tank Capacity	13.7 liters
Kerb Weight	160 kg
Front Suspension	WP APEX 43 mm Upside Down
ABS	Dual Channel
Tyre Front	110/70-17
Tyre Rear	150/60-R17
Ground Clearance	157 mm
Engine Type	Single Cylinder, Liquid Cooled