ELECTRICAL SYSTEM 16
177
M00729-11
Main work
– Connect the battery charger to the battery. Switch on the bat-
tery charger.
Battery charger (58429074000)
In addition, this battery charger can be used to test the open-
circuit voltage, the starting ability of the battery, and the alter-
nator. It is impossible to overcharge the battery using this
device.
Info
Never remove cover
1
.
– Switch off the battery charger after charging and disconnect
from the battery.
Guideline
The charging current, charging voltage, and charging time
must not be exceeded.
Charge the battery regularly
when the motorcycle is not
in use
3 months
– Position the negative cable and mount and tighten the screw.
Finishing work
– Mount the battery cover. ( p. 132)
– Mount the front rider's seat. ( p. 119)
To Next Page
Loading...
