COOLING SYSTEM 17
209
V00145-11
–
Loosen bleeder screw
3
.
Guideline
3 turns
– Tilt the vehicle slightly to the right.
– Pour in coolant until it emerges without bubbles at the bleeder
screw, and then mount and tighten the bleeder screw immedi-
ately.
Coolant ( p. 251)
– Completely fill the radiator with coolant. Mount the radiator
cap.
– Rest the vehicle on the side stand.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
– Always make sure there is sufficient ventilation
when running the engine.
– Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
– Start the engine and let it warm up.
To Next Page
Loading...
