Kubota KX080-3 - LCD Display for Warning

17OPERATION OF THE ENGINE
C Hour-meter
Indicates the total operating hours of the machine.
How the indicator works
A The meter advances one hour after an hour of
operation regardless of the engine rpm.
C Engine tachometer
Indicates the current rpm of the engine.
A The LCD display may be illegible when viewed from a
certain angle. This is not a display failure.
BLCD Display for Warning
C Remaining fuel warning
When the fuel level is very low, the lamp (yellow) starts
flashing and the following message appears in the
display.
C Battery charge warning
If the charging system fails, the lamp (red) starts
flashing and the following message appears in the
display.
C Engine oil pressure low warning
When the engine oil pressure drops too low, the lamp
(red) starts flashing and the following message appears in
the display.
Immediately stop the engine and check the engine oil
level.