EasyManua.ls Logo

Kubota KX080-3 - Operation Under Cold Weather Conditions; Preparation for Operation in Cold Weather; Procedure After Done Work

Kubota KX080-3
115 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
REGULAR CHECKS AND MAINTENANCE WORK64
BAir Filter Maintenance
To avoid personal injury:
A Wear eye protection.
The quickest and safest method of maintenance is the
exchange of the paper cartridge. Furthermore there are
different methods of cleaning the cartridge.
C Cleaning with compressed air
Pressure of compressed air must be under 205 kPa (2.1
kgf/ ), and the cartridge should be blown clean from the
inside to the outside until the dust deposits are noticeably
reduced.
A If the air suction is still inadequate, or the color of the
exhaust gases is abnormal even after the cleaning, the
air filter cartridge must be replaced.
BGreasing Swing Ball Bearing
1. Grease through the respective grease nipple. (at the
central nipple)
2. Grease at each 90 (1.58 rad.) position of the swing
frame.
3. Grease at each 90 (1.58 rad.) position of the pitch
bearing. Using the grease gun , apply 5 shots at every
position. Refer to the "RECOMMENDED OILS"
section.
(1) Grease nipple

Table of Contents

Other manuals for Kubota KX080-3

Related product manuals