Kubota KX080-4 - Page 135

111LIST OF SCREENS
No.
Message
Problem or failure
(What happened)
Machine behavior
(Provisional measure)
Correction
39
Regen.inhibition.
Release it.
Requirement for DPF
regeneration.
DPF must be regenerated,
but unable to start
regeneration because the
inhibited switch is activated.
Move the machine to a safe
place and release the inhibit
switch to start DPF
regeneration.If this error
code number still appears,
immediately contact your
local dealer.
40
Regen.inhibition.
Release it.
Now HP limited
Requirement for DPF
regeneration.
DPF must be regenerated,
but unable to start
regeneration because the
inhibited switch is activated.
If you leave the machine with
the hydraulic locked, the
engine can stop
automatically.
Move the machine to a safe
place and release the inhibit
switch to start DPF
regeneration.If this error
code number still appears,
immediately contact your
local dealer.
41
DPF is clogged up.
Need repairing
Requirement for DPF
regeneration.
DPF must be regenerated,
but unable to start
regeneration.
Immediately contact your
local dealer.
42
Exchange the DPF.
Requirement for DPF
replacement.
DPF must be replaced.
Immediately contact your
local dealer.
43
Warning-stop
engine.
Rev up and restart.
Stop the engine
automatically.
- Turn off the key.